Thermo Scientific DensityPRO NAI Series, User Manual

Page: 32 / 196

Startup & the Setup Wizard
Menu Screens: Keypad Display vs. EZ Cal II
3
-
2 DensityPRO User Manual Thermo Scientific
Note: Once a screen has been opened for editing, the up and down arrows
regain contrast control functionality.
If the screen is opened in write mode and the user is not logged in, the screen will
change to the password screen so the user may log in with a password. Only users with
engineering access may submit changes to the information stored in the gauge’s
database.
In writing mode, the function keys perform different operations.
– F1 will exit write mode without saving any changes.
– F2 will submit and save the new data.
– F3 will move the user through the different fields available for editing on the
screen.
Editing Fields with
Dropdown Menus
An arrow in front of a displayed field indicates a dropdown menu associated with that
field. Once the field is selected, the up and down arrow keys enable the user to explore
the dropdown selections. If a field contains more characters than the screen can
display, using the right and left arrows will shift the data provide visibility.
Once changes are complete, press the F2 button to submit and save the data to the
gauge.
Menu Screens:
Keypad Display
vs. EZ Cal II
Because the DensityPRO integrated units do not include a keypad display, it is
recommended that the EZ Cal II software be utilized to achieve full functionality. For
the purposes of this manual, functionality will be primarily demonstrated through
instructions on the operation of the EZ Cal II software. A complete map of the
DensityPRO NAI+ keypad display screens can be found in Appendix A,
Keypad
Display Menu Tree of DensityPRO Gauges . Each section of instruction on the EZ
Cal II software will provide the location of the corresponding keypad display screens in
Appendix A.