Thermo Scientific DensityPRO NAI Series, User Manual

Page: 30 / 196

EZ Cal II Overview
Startup
2
-
2 DensityPRO User Manual Thermo Scientific
– The option to display user interface menu text in the following languages:

English

Chinese (available in future releases)

Portuguese (available in future releases)

Spanish (available in future releases)
– The option to change the password mode entry.
Startup
Connect the serial port on a PC (Com A or Com B) to the RS232 serial port of the
DensityPRO gauge. This connection enables you to communicate with the gauge from
a PC running EZ Cal II software.
The
Measurement
Display
The measurement display shows the primary density or density-related measurement,
along with any additional measurements that you define in the setup. The
measurement display is shown continuously, except when the setup menus are being
accessed. The displayed measurement values are updated approximately every second.
All measurements are updated even when they are not being displayed.
The Setup
Wizard
The setup wizard provides you with a step-by-step procedure for entering the data
required for gauge operation. To start the wizard, open the EZ Cal II software and
click on the small blue wizard’s cap on the task bar, underneath the View menu
option.