Thermo Scientific DensityPRO NAI Series, User Manual

Page: 25 / 196

Thermo Scientific DensityPRO User Manual A- 1
-
3
Local Display
(Integrated Unit)
The DensityPRO integrated units have an optional local display that scrolls the data
on the screen. The display scrolls the data and units for Measurements 1 – 4 on the
two line display at a speed (scroll time) determined by the user.
Display & Keypad
(Remote Unit)
The purpose of the display and keypad on the DensityPRO remote transmitter is to
provide the user with the ability to access the configuration menus and system data
information.
Figure 1-3. Keypad
1. The display and keypad provide the user with the following:

The ability to configure communication ports A and B.

The ability to configure the Ethernet port.

The option to configure the system control setup.

The option to display the system status.

The option to configure the alarms and display the status of alarms.

The option to configure the execution of system commands.

The option to configure physical Input and Output setup and display the
current status of each.

The option to configure detector setup.

The option to configure density application setup.

The option to enter a special password for cold and warm start operation.

The option to change the password mode entry.

The option to display user interface menu text in the following languages:

English

Chinese (available in future releases)

Portuguese (available in future releases)

Spanish (available in future releases)