Thermo Scientific DensityPRO NAI Series, User Manual

Page: 121 / 196

Operation
Application Screens
Thermo Scientific DensityPRO User Manual 4-69
Action
The Application Action tab provides the user the ability to hold the measurements
configured on the Additional Measurement Setup tab at the desired value. The
following options apply to Measurements #1 – #4.
To access the information on Application Action tabs using only the remote
transmitter keypad, see
Figure A-20 .
Figure 4-36. Application Screen, Action Tab
1. Choose an operational mode from the Hold/Live dropdown.

Live

Hold
 If Hold is selected, the Hold Value textbox becomes available to the user.
Enter a hold value for the measurement, using the same units used in the
measurement’s configuration.
2. The following fields utilize values from other processes. These fields are not
configurable by the user on this screen.

Allocation – Displays the type of measurement: Density, Pressure,
Temperature or Flow.

Current Value – Displays the current measurement value.

Unit – Displays the units associated with the measurement’s configuration.