Thermo Scientific Corona Veo, Operating Manual

Page: 241 / 262

10 • Accessories, Consumables and Replacement Parts
Charged Aerosol Detectors Corona Veo (RS) Operating Manual Page 241
10.2 Ship Kit
The ship kit includes the items listed in the table. The kit content is
subject to change and may vary from the information in this manual. See
the content list included in the kit for the most recent information about
the kit content at the time when the detector is shipped.
For reordering information, see section 10.4 Consumables and
Replacement Parts , page 245 .
10.2.1 Corona Veo RS Detector
Item Quantity
in
shipment
Detector drainage components for leak port and waste port:
Tee pieces 2
L pieces 4
Flexible hose, 11.4 mm x 8.3 mm O.D. x I.D., 2 m length 1
Tubing kit, including: 1
Gas inlet tubing, 1/8" x 1/4" I.D. x O.D., 2.5 m length 1
Gas exhaust tubing, consisting of
• Exhaust hose, 1/2" x 11/16" I.D. x O.D., 2.5 m length
•
Barb stem fitting, 1/2" x 3/8" I.D. x O.D. (pre-installed)
1
Capillary, PEEK, 0.005" x 1/16" I.D. x O.D., red, 2 m length 1
RheFlex fittings, PEEK, 1/16", finger-tight 4
Gas exhaust tubing adapter, inch to metric, 1/4" O.D. 1
Filter frits, stainless steel, porosity 0.5 µm 10
Tubing cutter 1
Digital I/O cable, 2-conductor 1
USB cable, type A to type B, 3 m 1
Tool kit, including:
•
Multitool
• Offset screwdrivers, Torx T10 and T20
•
Hexagon socket wrench (1/2" x 9/16")
•
Slotted screwdriver (2.5 x 50 mm)
1