manualshive.com logo in svg

Thermo Scientific Cell Locker, Operating Instructions Manual

Share
Download
Thermo Scientific Cell Locker Operating Instructions Manual Download Page 4

Cell Locker 50155007_C   27.05.21

2

Thermo Fisher Scientific

Chapter 1  General notes

1. General notes

1.1  Explanation of safety information and symbols

Warning  

Indicates a hazardous situation which, if not avoided, could result in death or serious injuries.

Caution

 

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injuries.

Notice

Indicates a situation which, if not avoided, could result in damage to equipment or property.

In chapters of the instruction manual which deal with safety, this icon appears under the title of the 
chapter. Displayed on the equipment, this icon denotes that special attention must be paid to the 
information given in the instruction manual or accompanying documents.

Is used for application hints and useful information

Harmful liquids!

Fire hazard!

Toxic substances!

Wear safety gloves!

Wear safety goggles!

Wear breathing protection!

Summary of Contents for Cell Locker





















Reviews:

No comments

Brands by name

Popular brands

Load more brands