Cell Locker 50155007_C 27.05.21
9
Thermo Fisher Scientific
Chapter 4 Cleaning and disinfection
4. Cleaning and disinfection
Before starting any work, the following safety hints should be followed:
4.1 Cleaning
Remove dirt residues and deposit thoroughly using a solution of lukewarm water and mild
detergent.
Wipe the surfaces and work plate with a clean cloth and clear water. Then, wipe the surfaces dry
using a clean cloth.
Warning
Health hazard!
The surfaces of the work space may be contaminated. Contact with contaminated cleaning
liquids may cause infections. Disinfectants may contain harmful substances. When cleaning and
disinfecting, always observe the safety instructions and hygiene guidelines.
Wear safety goggles!
Wear safety gloves!
Wear breathing protection!
Observe the safety instructions of the disinfectant‘s manufacturer and the hygiene supervisor!
Caution
Incompatible cleaners!
Some of the
C
ELL
LOCKER
components are made of plastic.
Solvents may attack plastics.
Strong acids or alkaline solutions may cause corrosion of plastics.
Caution
Moisture-sensitive components!
Do not spray cleaning agent onto the membrane filter of the
C
ELL
LOCKER
. When wiping the
membrane filter frame make sure that no moisture contacts the membrane filter.
Summary of Contents for Cell Locker
Page 20: ......
