Installing the Basic System
Hazardous Area Installations
3-14 AutoPILOT PRO Flow Computer User Guide
Thermo Fisher Scientific
When the flow computer is operated in a hazardous environment, the
system must be turned off before any board can be removed or installed.
If this is equipment is not utilized in a manner specified by the
manufacturer, the protection of the equipment may be impaired.
The AutoPILOT PRO flow computer is marked for use in hazardous areas
in accordance with the ATEX Directive. It is marked as follows.
Note
NNNN is the notified body number of the notified body issuing the
current quality assurance notification certificate, e.g. 1712 = Epsilon.
With AutoMITTER SIB option
[EPSILON 08 ATEX 2440X] II 3 (1) G Ex nL [ia] IIB T4
Installed in the hazardous area
[EPSILON 08 ATEX 2440X] is marked on the label as shown below.
Figure 3–12. Flow computer certification tag with AutoMITTER SIB option
Marking
