Hardware Description: Basic System
The Main Board
2-12 AutoPILOT PRO Flow Computer User Guide
Thermo Fisher Scientific
For the internal battery option, connect TB10 on the main board to the
solar panel as shown below. For more information on the internal battery,
refer to
“Installing the Internal Battery”
Figure 2–9. Solar panel wiring for internal battery option
TB11 on the main board is the system power supply input. It is wired to
TB1 on the door panel of the flow computer enclosure.
Figure 2–10. System power supply input wiring
TB15 on the main board provides the connection for optional MEBs.
Refer to
TB14 on the main board provides the connection for an AutoMITTER
safety interface board (SIB). The SIB provides connections for up to four
remote mounted AutoMITTER PRO transmitters. Go to
more on this option.
Solar Charger Power
Input
System Power Supply
Input
MEB Interface
SIB Interface
