VeritiPro
™
Thermal Cycler Installation and Operation
Catalog Number
A47394
Doc. Part No.
100093319
Pub. No.
MAN0019367
Rev.
A.0
Note:
For safety and biohazard guidelines, see the “Safety”
appendix in the
VeritiPro
™
Thermal Cycler User Guide
(Pub. No. MAN0019157). Read the Safety Data Sheets (SDSs) and
follow the handling instructions. Wear appropriate protective
eyewear, clothing, and gloves.
Product description
This document summarizes procedures for installing and using the
VeritiPro
™
Thermal Cycler with 6-zone 96-well 0.2 mL block and
VeriFlex
™
"better than gradient
™
" technology. For detailed
instructions, see the
VeritiPro
™
Thermal Cycler User Guide
(Pub. No.
MAN0019157).
Fig. 1 VeritiPro
™
Thermal Cycler
Required materials not provided
• Can of compressed air (For use in cleaning wells of sample
block).
•
(Optional)
Electrical protective devices.
Note:
The use of one or more of the following electrical
protective devices is recommended.
·
Power line regulator (100–240 V)
·
Surge protector/line conditioner (10-kVA)
·
Uninterruptible power supply (1.5-kVA)
Set up the VeritiPro
™
Thermal Cycler
IMPORTANT!
Save the packing materials and box in case you
need to ship the instrument in for service.
1.
Open the shipping crate to unpack the instrument. You should
receive one box containing the thermal cycler and the
accessories.
2.
Remove the packing material, then inspect the instrument for
shipping damage.
3.
Use compressed air to clear out each well of the sample block
to remove particles that may have collected inside during
shipping.
4.
Move the instrument to an installation site that meets the
spatial and weight requirements for the thermal cycler (see
“Technical specifications” on page 5).
5.
Connect the instrument to a power outlet.
a.
Connect the power cord to the instrument.
1
1
Power cord port
b.
Install any desired electrical protective devices.
c.
Connect the power cord to a wall plug.
6.
Turn the power switch on, then wait for the instrument to start
up. Proceed with the installation after the touchscreen displays
the Home screen, indicating that the instrument is active.
When you power on the instrument, the instrument will take
under a minute to start up.
1
1
Power switch
The Home screen will display following successful installation.
QUICK REFERENCE
For Research Use Only. Not for use in diagnostic procedures.
