Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual Download

Page: 79 / 242

Shared (public), hidden (my plates), and guest plate setup files

Create by

setting Plate

setup

security to...

Accessible to

users...

Stored in folder on

instrument...

Analysis settings used...

File name convention

used...

Shared

All users, including

guest

Public

Analysis settings saved in

the plate setup

Last settings specified

by the signed-in user

(not saved with plate

setup)

Note:

If a guest user edits a shared plate setup, the plate must be saved under a new name, and the Plate setup

security is set to Hidden and cannot be changed.

Hidden

Only the user who

created the plate

setup

My plates

Last settings specified by the

signed-in user (not saved

with plate setup)

Last settings specified

by the signed-in user

(not saved with plate

setup)

Guest plate

setup

security is

automatically

set to Hidden

and cannot

be changed

Guest user only

My plates

Last settings specified by the

signed-in user (not saved

with plate setup)

Last settings specified

by the signed-in user

(not saved with plate

setup)

Overview of plate setup settings

Category

Setting

Notes

Plate

• Plate properties
• Plate set up security (Shared or Hidden)
• File name convention
• Analysis settings

The analysis settings are saved with the plate

setup as follows:

• Hidden plates—The analysis settings are

saved with the plate setup, and are used

the next time that you open or create a

hidden plate. The analysis settings will

not be available to other system users.

• Shared plates—The analysis settings are

saved with the plate setup, and are used

the next time that you open or create a

shared plate. The analysis settings will

be available to other system users.

User

‑

created analysis settings:

• Users can name and save analysis

settings.

• If you create analysis settings in the

instrument software, the settings will

not be available to other users.

Chapter 6

Create or modify a plate setup from the instrument

Shared (public), hidden (my plates), and guest plate setup files

SeqStudio

™

Genetic Analyzer Instrument and Software User Guide

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer



















































































































































































































































Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands

Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer, User Manual

Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands