Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual Download

Page: 100 / 242

Edit injection group run settings

In the Results screen:

Select Actions

Edit injection group.

Edit settings as needed, then click OK.

Re-inject or delete an injection group

In the Results screen:
Select Actions

Re-inject group or Actions

Delete injection group.

Export a QC report

The QC Report command is not available for an injection until the injection is

complete. The QC Report command is not available for any injections if the plate

setup Save location does not specify Cloud.
In the Remote Monitor screen:
Select Actions

QC Report.

A PDF of the plate QC report is generated.

Remote Monitoring App raw trace

Figure 13

Fragment analysis raw trace

Zoom in/out.

Raw trace.

Thumbnail trace—Click-drag to view another region of the trace.

Lock/unlock trace zooming for all traces in the injection group.

View Options—Select the dye color to display; set vertical scaling.

Cursor position indicator (red line).

Chapter 7

Start and monitor a run

Monitor a run from the Connect cloud-based platform

100

SeqStudio

™

Genetic Analyzer Instrument and Software User Guide

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer



















































































































































































































































Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands

Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer, User Manual

Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands