manualshive.com logo in svg

Thermo Scientific Applied Biosystems QuantStudio 6 Pro, User Manual, Page: 74 / 241

Share
Download
Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual Download Page 74

2.

(Optional)

 Tap the dropdown list then select the view for the plot.

•

Linear

•

Log 10

3.

(Optional)

 Tap 

Actions

4

Analyze amp plots

.

4.

(Optional)

 Tap 

Actions

4

View well details

 to see the amplification for a specific well.

5.

Swipe right twice or tap the left arrow ( ) twice to return to the home screen.

Adjust the display of real-time plots during a run

1.

In the real-time amplification plot, tap 

 (Zoom)

 or pinch.

2.

Tap the arrows to pan left or right, or swipe left or right within the amplification plot.

View the time remaining during a run

1.

In the home screen during a run, swipe left three times or tap the right arrow ( ) three times.
The time remaining in the run is displayed.

2.

Swipe right three times or tap the left arrow ( ) three times to return to the home screen.

Lock the touchscreen during a run

After you have started a run, you can lock the touchscreen so that other users cannot interfere with
instrument operation.

Note: 

You must be signed in.

1.

In the home screen during a run, tap 

 (Profile)

.

2.

Tap 

Lock screen

4

Lock

.

The status dial displays 

Locked

.

The touchscreen automatically unlocks when the run is complete.

The touchscreen can be unlocked during the run (see “Unlock the touchscreen during a run”

 on

page 75

).

Chapter 5 

Options for a run

View the time remaining during a run

5

74

QuantStudio

™

 6 Pro Real-Time PCR System and QuantStudio

™

 7 Pro Real-Time PCR System User Guide

Summary of Contents for Applied Biosystems QuantStudio 6 Pro


















































































































































































































































Reviews:

No comments