manualshive.com logo in svg

Thermo Scientific Applied Biosystems QuantStudio 6 Pro, User Manual

The Thermo Scientific Applied Biosystems QuantStudio 6 Pro is a cutting-edge scientific instrument. It is essential to have the User Manual to fully utilize its features. Download the comprehensive and free User Manual from our website to maximize the potential of this exceptional product.

Share
Download
background image

(continued)

Phase

Steps that occur

If your Connect account is
unlinked:

• Your local instrument profile (

UserABC

) is displayed in the home screen of the

instrument.

• Plate files and data files that were saved under your Connect instrument profile

are accessible under your local instrument profile.

• Plate files and data files are saved under local instrument profile and can be

copied to Connect (see “Copy plate files”

 on page 77

 and “Transfer data files at a

later time”

 on page 81

).

• Your local instrument profile name (

UserABC

) is available for selection in the 

Sign

In

 screen.

If you link when you 

are not

 signed in to the instrument

In this scenario, your local instrument profile name is created automatically at the time that you link. The
same user name is used for your local instrument profile and your Connect profile. Plates and results
are accessible when you sign in with either profile.

If you link to Connect when you 

are not

 signed in to the instrument:

Phase

Steps that occur

Before you link:

• In the 

Sign In

 screen, you tap 

Get Started

4

Connect

.

When you link:

• You link your profile (see “Link the instrument to your Connect account”

 on

page 126

).

• If this is the first time you link, a Connect instrument and a local instrument

profile (with standard role) are created with the same name using the

FirstNameLastInitial

 of the user name from your thermofisher.com account.

Example: 

[email protected]

 First name is 

User

, Last name is 

Gray

.

Connect account username is 

User G

.

• Your local instrument profile (

User G.

) is linked to your Connect account

(

[email protected]

).

• Your Connect instrument profile (

User G.

) replaces your local instrument profile.

After you link:

• Your Connect instrument profile (

User G.

) and 

 is displayed in the home screen

of the instrument.

• Plate files and data files from your local instrument profile can be transferred to

Connect.

• New plate files and data files are saved under your Connect instrument profile.
• Your Connect instrument profile name (

User G. 

) is available for selection in the

Sign In

 screen.

Chapter 8 

Manage profiles

If you link when you are not signed in to the instrument

8

130

QuantStudio

™

 6 Pro Real-Time PCR System and QuantStudio

™

 7 Pro Real-Time PCR System User Guide

Summary of Contents for Applied Biosystems QuantStudio 6 Pro


















































































































































































































































Reviews:

No comments

Related manuals for Applied Biosystems QuantStudio 6 Pro

Dana Design ArcLight Quick Start Instructions preview
ArcLight
Brand: Dana Design Pages: 20
Varytec LED Street Bar 16x3W RGB IP65 User Manual preview
LED Street Bar 16x3W RGB IP65
Brand: Varytec Pages: 9
VARILITE VL1600 PROFILE Quick Start Manual preview
VL1600 PROFILE
Brand: VARILITE Pages: 8
Vari Lite EVENTPROFILE VL800 User Manual preview
EVENTPROFILE VL800
Brand: Vari Lite Pages: 34
Varex Imaging Optica 30 Series User Manual preview
Optica 30 Series
Brand: Varex Imaging Pages: 36
DOTLUX FLOOReco 5164-040120 User Manual preview
FLOOReco 5164-040120
Brand: DOTLUX Pages: 10
Waves SUB Align User Manual preview
SUB Align
Brand: Waves Pages: 8
OMGA TR 2B INC INT NC Operation And Maintenance Manual preview
TR 2B INC INT NC
Brand: OMGA Pages: 76
Hella Gutmann mega macs 50 Quick Start Manual preview
mega macs 50
Brand: Hella Gutmann Pages: 48
Somogyi Elektronic home FLP 1600 SOLAR Instruction Manual preview
home FLP 1600 SOLAR
Brand: Somogyi Elektronic Pages: 15
Lutron Electronics DT-2239A Operation Manual preview
DT-2239A
Brand: Lutron Electronics Pages: 10
Mikrona MIGMA 200-E Planning / Mounting Manuallines preview
MIGMA 200-E
Brand: Mikrona Pages: 12
Mark Fitness XM-3151 Owner'S Manual preview
XM-3151
Brand: Mark Fitness Pages: 10
Black Flag Bug Zappers BZ-15 Owner'S Manual preview
Bug Zappers BZ-15
Brand: Black Flag Pages: 2
Keithley SourceMeter 2425 Service Manual preview
SourceMeter 2425
Brand: Keithley Pages: 141
Lithium Grim PhotoFet Building Instructions preview
PhotoFet
Brand: Lithium Grim Pages: 13
velda T-Flow Tronic Series User Instructions preview
T-Flow Tronic Series
Brand: velda Pages: 8
CEM Discover Protein Hydrolysis Installation And Operation Instructions Manual preview
Discover Protein Hydrolysis
Brand: CEM Pages: 6

Brands by name

Popular brands

Load more brands