Safety Considerations
Electrical
Your system was designed with protective covers to prevent exposure to
dangerous voltage and other electrical hazards. If you see either of the
following symbols on your system, there is a risk of electric shock in the
vicinity of the symbol.
Danger
Only qualified factory-trained service representatives should attempt to
service a component that carries either of these symbols.
Danger
If a protective cover on the instrument or computer appears damaged, turn
off the system and secure it against any unintended operation. Always
examine the protective cover for transport stresses after shipping.
Warning
Before servicing the unit, turn off power to the branch circuit.
Warning
Even after the instrument has been disconnected from all voltage sources,
capacitors may remain charged for up to 30 seconds.
Electrical service
Check the line voltage and frequency at the wall outlet or other AC power
source before you connect the system or turn on the power. This should be
done when the system is installed and any time the system is moved to a
different AC power source.
Danger
To avoid injury, only a qualified person using the appropriate measuring
device should check the line voltage, current and line frequency.
See the specifications for your model later in this manual for electrical
service details.
Thermo Fisher Scientific
Antaris EX Safety, Installation, and Site Preparation Guide
13
