manualshive.com logo in svg

Thermo Scientific Accela Pump, Hardware Manual

Share
Download
Thermo Scientific Accela Pump Hardware Manual Download Page 5

WEEE Compliance

This product is required to comply with the European Union’s Waste Electrical & Electronic Equipment (WEEE) 
Directive 2002/96/EC. It is marked with the following symbol:

Thermo Fisher Scientific has contracted with one or more recycling or disposal companies in each European Union 
(EU) Member State, and these companies should dispose of or recycle this product. See 

www.thermo.com/

WEEERoHS

 for further information on Thermo Fisher Scientific’s compliance with these Directives and the 

recyclers in your country.

WEEE Konformität

Dieses Produkt muss die EU Waste Electrical & Electronic Equipment (WEEE) Richtlinie 2002/96/EC erfüllen.  
Das Produkt ist durch folgendes Symbol gekennzeichnet:

Thermo Fisher Scientific hat Vereinbarungen mit Verwertungs-/Entsorgungsfirmen in allen EU-Mitgliedsstaaten 
getroffen, damit dieses Produkt durch diese Firmen wiederverwertet oder entsorgt werden kann. Mehr Information 
über die Einhaltung dieser Anweisungen durch Thermo Fisher Scientific, über die Verwerter, und weitere Hinweise, 
die nützlich sind, um die Produkte zu identifizieren, die unter diese RoHS Anweisung fallen, finden sie unter  

www.thermo.com/WEEERoHS

. 

Summary of Contents for Accela Pump



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands