Thermo Scientific 5028i, Instruction Manual

Page: 62 / 330

Operation
Firmware Overview
3-8 Model 5028
i
Instruction Manual Thermo Fisher Scientific
The Ambient Conditions Run screen displays the sample filter
temperature, the sample filter relative humidity, the differential pressure
across the orifice, and the vacuum under the filter tape.
X
SAMPLE CONDITIONS
PPM
12:34
x
RANGE AVG DIAGS ALARM
Status Bar
Status Bar Icons
Title Bar
PPM
%
RHSMP
RHSMPB
PFLOW
PFLOWB
PVAC
PVACB
25.0
40.0
20.0
20.0
65.0
65.0
%
mm Hg
mm Hg
mm Hg
mm Hg
The Mass Sensor Data Run screen displays the real-time beta counts
during attenuation and the initial beta counts from a fresh filter spot.
X
MASS SENSOR DATA
W
PPM
12:34
x
RANGE AVG DIAGS ALARM
Status Bar
Status Bar Icons
Title Bar
B
RAW
B
RAWB
B
ZERO
B
ZEROB
9800.2
9800.2
10000.9
10000.9
1/S
1/S
1/S
1/S
The Main Menu contains a number of submenus. Instrument
parameters and settings can be read and modified within the submenus
according to their function. The concentration appears above the Main
Menu and submenus in every screen. The Service menu is visible only
when the instrument is in service mode. For more information on the
service mode, see “ Service Mode ” later in this chapter.
l
Use and to move the cursor up and down.
l
Press to make a selection.
l
Press to return to the Main Menu or to return to the
Run screen.
Sample Conditions Run Screen
Mass Sensor Data Run Screen
Main Menu