Thermo Scientific 5028i, Instruction Manual

Page: 50 / 330

Installation
Connecting External Devices
2-14 Model 5028
i
Instruction Manual Thermo Fisher Scientific
Figure 2–8.
Pin-Out of Rear Panel Connector
Table 2–3. Default Analog Outputs
Channel Connector Pin I/O Terminal Pin Description
1 14 1 PM
2 33 3 AVG PM
3 15 5 Flow
4 34 7 Ambient Temperature
5 17 9 Flow Temperature
6 36 11 Ambient Relative Humidity
Ground 16, 18, 19, 35, 37 2, 4, 6, 8, 10, 12 Signal Ground
Note
All channels are user definable. If any customization has been
made to the analog output configuration, the default selections may not
apply.
s
Figure 2–9 shows the recommended method for attaching the cable
(customer supplied) to the terminal board using the included tie-down
and spacer. Table 2–4 identifies the connector pins and associated
signals.
D/O Terminal Board