Thermo Scientific 5028i, Instruction Manual

Page: 270 / 330

C-Link Protocol Commands
Calibration
B-30 Model 5028
i
Instruction Manual Thermo Fisher Scientific
alpha eff a/b
This command reports the current value of alpha efficiency for the
detector. The following example reports that the alpha efficiency is 0.12.
Send: alpha eff a
Receive: alpha eff a 0.120
Send: alpha eff b
Receive: alpha eff b 0.120
set alpha eff a/b value
This command sets the alpha efficiency for the detector to value , where
value is a floating-point number representing the alpha efficiency for the
detector. The following example sets the alpha efficiency to.0.15.
Send: set alpha eff a 0.15
Receive: set alpha eff a 0.150 ok
Send: set alpha eff b 0.15
Receive: set alpha eff b 0.150 ok
alpha th a/b
This command reports the current value of alpha threshold for the
detector. The following example reports that the alpha threshold is
1220.
Send: alpha th a
Receive: alpha th a 1220
Send: alpha th b
Receive: alpha th b 1220
set alpha th a/b
value
This command sets the alpha threshold for the detector to value , where
value is a floating-point number representing the alpha threshold for the
detector. The following example sets the alpha threshold to 1250.
Send: set alpha th a 1250
Receive: set alpha th a 1250 ok
Send: set alpha th b 1250
Receive: set alpha th b 1250 ok
amb rh offset
This command reports the current ambient RH offset, in percent. The
following example reports that the ambient RH offset is 0.6%.
Send: amb rh offset
Receive: amb rh offset 0.6
%
Calibration