Thermo Scientific 15828722, Instruction Manual

Page: 12 / 39

8 | Control Panel Centrifuge GT 4 / 4R
Control Panel
Control Panel
The control panel contains the keys and displays of the centrifuge (only the power switch is located on the back of the device).
All parameters can be selected and changed during operation.
Keys
The keys allow user intervention for controlling the operating mode as follows:
PULSE
START STOP
OPEN
SPEED
3
1 2
4
5 6
TIME TEMP ACC DEC BUCKET
X G
RPM
Program selection keys
Changing the display mode
Prewarming or precooling
STOP key
START key
Bucket key
Running time
Speed / RCF value
PULSE key
Temperature
Acceleration curve
Braking curve
Bucket selection
OPEN key
Speed / RCF value
Key Display contents
Start Normal start of the centrifuge
Stop End run manually
Open Lid
Automatic release (possible only when device is switched ON). Emergency release
(refer to the section
Mechanical Emergency Door Release )
Pulse
By pressing the PULSE key the centrifuge starts immediately and accelerates up to the
end speed. Releasing the key initiates a stopping process at the highest braking
curves
Change value Use the arrow keys in order to modify the displayed value
Snow symbol Press the snow symbol key for prewarming or precooling the centrifuge
Changing the
display mode
Use the Change key to change the display mode (Speed / RCF value)
START
STOP
OPEN
PULSE