![background image](http://html1.mh-extra.com/html/thermo-king/t-1000r/t-1000r_maintenance-manual_1104339095.webp)
Operating Instructions Premium HMI
6-23
Single Zone Control – Multi Zone Control (SPECTRUM)
If enabled in Guarded Access, Single Zone Control allow single temperature operation. If Single Zone Control operation is
selected then all zones will be forced on and will control to the same setpoint. All bulkheads should be down to create one large
compartment. Multi Zone Control allows separate control for each configured zone.
Start Sleep Mode
If enabled in Guarded Access, Sleep Mode is used to keep the engine warm and the battery charged when the unit is not in use.
When the unit is in Sleep Mode the display will show "SLEEP" and the current time. When Sleep Mode is entered the unit will
start and run to confirm proper battery charge level and engine temperature.
IMPORTANT: While in Sleep Mode the unit will not monitor or maintain setpoint and load temperature. Fuel level should
be monitored as the unit may run periodically, particularly in cold weather.
The following features are available in Sleep Mode.
Program Wakeup Time:
This feature allows a wakeup time to be specified. When the selected time is reached the unit will start and
resume normal operation.
If a Wakeup Time is selected the following features are available:
Day to Wake Up:
This feature allows the day of the week the unit is to wake up to be specified.
Hour to Wake Up:
This feature allows the hour the unit is to wake up to be specified.
Minute to Wake Up:
This feature allows the minute the unit is to wake up to be specified.
Run Pretrip on Wakeup:
This feature allows a Pretrip Test to be automatically run when the unit wakes up.
Mode changes are made using the Mode Menu. From the Premium Display, press the MENU key.(Figure "Menu Key" page
The Language Menu or Alarm Menu will appear. Press the NEXT key as required to show the Mode Menu. When the Mode
Menu is shown press the SELECT key.
Select Key
The first mode change screen will appear. To choose that function, press the SELECT key. To Scroll thru the Mode Menu
press the NEXT key.
Select and Next Keys
Selecting CYCLE-SENTRY or Continuous Mode
When CYCLE-SENTRY mode is selected the unit will start and stop automatically to maintain setpoint, keep the engine warm
and the battery charged. When Continuous Mode is selected, the unit will start automatically and run continuously to maintain
setpoint and provide constant airflow. From the Premium Display, press the MENU key. (Figure "Menu Key" page 6-15)
The Language Menu or Alarm Menu will appear. Press the NEXT key as required to display the Mode Menu. When the Mode
Menu is shown press the SELECT key.
Select Key
The Turn Off/Turn On CYCLE-SENTRY screen will appear. In the display shown below, the unit is operating in
CYCLE-SENTRY mode. Turning CYCLE-SENTRY mode off will result in the unit running in Continuous mode.
Summary of Contents for T-1000R
