![background image](http://html1.mh-extra.com/html/thermo-king/t-1000r/t-1000r_maintenance-manual_1104339104.webp)
Operating Instructions Standard HMI
7-2
CONTROLLER DESCRIPTION
The TSR/TSR-2/TSR-3 Standard Truck HMI (Human/Machine Interface) Control Panel is supplied as standard equipment on
TSR/TSR-2/TSR-3 Single Temperature Truck applications. It is used to operate the unit and display some unit information. The
TSR/TSR-2/TSR-3 Standard Truck HMI Control Panel communicates with the base controller via the CAN (Controller Area
Network) bus. It is connected to the base controller via CAN Connector J14 on the interface board. The TSR/TSR-2/TSR-3
Standard Truck HMI Control Panel is typically located in the vehicle driver's compartment. It may be located in the truck
dashboard using a DIN mounting ring or under the dashboard using an under dash mounting kit.
TSR/TSR-2/TSR-3Truck HMI Controller
• The TSR/TSR-2/TSR-3 Standard Truck HMI Control Panel consists of a display and nine touch-sensitive keys.
• The display is capable of showing numbers and lighting several icons. It does not display text, thereby making it suitable for use with any
language.
• Amber indicator LED's are located next to each of the four function keys below the display. The LED will light when that function is active.
• A red indicator LED is located between the ON Key and OFF Key. This indicator will glow if Alarm Code 91 Check Electric Ready Input
occurs. It will also glow if a 15 pin Thermo King data cable is connected to the serial port on the back of the controller (DPD).
Controller Features
• Displays Box Temperature and Setpoint in Fahrenheit or Celsius
• Displays Engine Running and Motor Running Hourmeters
• Changes unit or zone Setpoints
• Selects and Indicates CYCLE-SENTRY or Continuous Mode Operation
• Selects and Indicates High Speed Lock-Out Operation
• Initiates and Indicates a unit or zone Defrost Cycle
• Indicates an Alarm Condition Exists, Displays and Clears Alarms
• Initiates and Indicates a Pretrip Test
• Sends a Start of Trip to the ServiceWatch data logger.
• Changes Display Brightness
• Shows HMI Control Panel Serial Number and Software Revision.
• The TSR/TSR-3 Standard Truck HMI Control Panel consists of a display and nine touch-sensitive keys.
• The display is capable of showing numbers and lighting several icons. It does not display text, thereby making it suitable for use with any
language.
• Amber indicator LED’s are located next to each of the four function keys below the display. The LED will light when that function is active.
• A red indicator LED is located between the ON Key and OFF Key. This indicator will glow if Alarm Code 91 Check Electric Ready Input
occurs. It will also glow if a 15 pin Thermo King data cable is connected to the serial port on the back of the controller.
Display
The display presents information to the operator. This information includes setpoint and box temperature, hourmeter readings,
alarms and several icons as shown below. All display segments and icons are shown below
Display
The upper row of numbers can display the Box Temperature, Engine Run Time Hourmeter or Alarm Code(s).
The lower row of numbers can display the Setpoint, Electric Run Time Hourmeter or Total Number of Alarms.
The meaning of the display icons are shown in the table below.
When this icon is present the upper display is showing the actual box temperature inside the truck box.
When this icon is present the lower display is showing the current setpoint.
Summary of Contents for T-1000R
