Thermo King SB-190 30, Manual

Page: 32 / 119

Operating Instructions (Rev. 12/03)
22
WARNING: The unit may start and run
automatically any time the On/Off switch is in the
“On” position.
On/Off/Sleep Switch (Optional)
This switch turns the unit on and off and also places the unit
directly into the Sleep Mode without an exit time. When the
switch is in the “Off” position, the display will be off and
the display backlight will be off. The switch should always
be placed in the “Off” position before servicing the unit.
When the switch is in the “On” position, the display back-
light will turn on and the Standard Display will appear.
When the switch is in the “Sleep” position, the unit will
enter the Sleep Mode, the display backlight will turn on and
the display will show [SLEEP] and [MODE].
WARNING: The unit may start and run automati-
cally any time the On/Off/Sleep switch is in the
“On” or “Sleep” position.
SELECT SETPOINT ENTER
ALARM
HOURS MODE GAUGES PRETRIP
TEMPERATURE
SETPOINT
COOL
HEAT
DEFROST
HIGH SPEED
CYCLE
SENTRY
ALARM
MODULATION
IN-RANGE
!
CODE CLEAR
CAUTION: WHEN UNIT SWITCH IS ON.
UNIT MAY START ANYTIME
OFF
ON
COMPUTER
PRINTER
THERMOGUARD uP VI
1. Display 4. Printer Port (optional)
2. Keypad 5. On/Off Switch
3, Computer Port (optional)
Control Panel
ARA110
5
2
4
1
3