Thermo King 919180, Manual

Page: 44 / 148

Remote Control Panel Features
44
Selecting CYCLE-SENTRY or
Continuous Mode
Figure 20: Selecting CYCLE-SENTRY or Continuous Mode
1. Press the
O
N
key to turn the unit On.
2. Press the
S
ELECT
key to display
[CYCLS] and [YES] or [no].
3. Press the or
A
RROW
keys to
select the desired mode
[YES] = CYCLE-SENTRY mode
[no] = Continuous mode.
4. Press the
E
NTER
key to load the new
operating mode selection into the
microprocessor.
IMPORTANT: The
E
NTER
key must be pressed or
the setpoint will not be changed. The display will
return to the Standard Display and the setpoint
will return to the old setpoint in about
10 seconds if the
E
NTER
key is not pressed.
Starting The Engine
Figure 21: Starting The Engine
1. Press the
O
N
key to turn the unit On.
If no other key is pressed, the engine will
automatically preheat and start in about
10 seconds in either CYCLE-SENTRY or
Continuous mode. If other keys are pressed
(for example: to change the setpoint or view
display screens), the engine will automatically
preheat and start about 10 seconds after the
last key is pressed.
CAUTION: This unit will start
automatically in either CYCLE-SENTRY
or Continuous mode after the
O
N
key is
pressed.