![background image](http://html1.mh-extra.com/html/thermo-king/098916/098916_maintenance-manual_1104333068.webp)
Operating Instructions
67
Misc. Functions Menu
The Misc. Functions menu displays a list of
functions that identifies trips and determines how
the controller records and displays operating
information. The following functions are
available:
•
Date Time: Sets the controller time and date.
•
Status: Displays status messages. See the
complete list of all status messages and the
corrective action listed in the Diagnosing and
Troubleshooting Section in the back of the
manual.
•
Run Time: Displays and sets operating hours
for the unit and components.
•
Program Version: Displays the current
software version loaded in the controller:
Controller (CTRL), EPROM and program
serial numbers (SER NO).
NOTE: The Controller Label on the side of
the control box shows the controller serial
number and the EPROM version.
•
Cargo Data: Sets important trip information
about the container and the load in the
controller.
•
C/F Mode: Sets the temperature value (Celsius
or Fahrenheit) the controller uses to record
and display temperature (including historical
data).
A complete listing of the controller operating
menu is located on an 11” x 17” fold out on the
last page of this manual.
View Misc. Functions Menu
With the
U
NIT
O
N
/O
FF
switch
O
N
and the LCD
display showing the standard display (setpoint):
1. Press the
F2
or
F3
key to enter the menu list.
Press
F2
or
F3
key to scroll through Main
menu until [MISC. FUNCTIONS] appears in
LCD display.
2. Press the
F4
key to access the Misc. Functions
menu. The first command in the submenu
appears in the LCD display: Date Time.
Figure 38: Misc. Functions Menu
3. Press the
F2
or
F3
key to scroll to the desired
function:
•
[DATE TIME]
•
[STATUS]
•
[RUN TIME]
•
[PROGRAM VERSION]
•
[CARGO DATA]
•
[C/F MODE]
4. Press the
F4
key to access the function
selected.
ALARMS
DATA
RMM STATE
CONFIGURATION
MISC FUNCTIONS
Misc. Functions
Menu
- Date Time
- Status
- Run Time
- Program Version
- Cargo Data
- C/F Mode
MAIN MENU
DATALOGGER
COMMANDS
NOTE: All screens are NOT
present on all units. The
screens that display on the
controller are determined by
the Controller Software
settings and the options
installed on the unit.
Summary of Contents for 098916
