manualshive.com logo in svg

Thermo Electron Nicolet 380, User Manual, Page: 25 / 135

Share
Download
Thermo Electron Nicolet 380 User Manual Download Page 25

 

 

View the “Powering Up” unit of the “Spectrometer Tour” tutorial for 
complete instructions on turning on the system. 
 

Starting OMNIC 

Follow these steps to start OMNIC: 

1.  Start the Windows software. 

Depending on the version of Windows you are using, you may 
be required to enter your user name and password. Enter the 
information when you are prompted. 
 

2.  Double-click the OMNIC (or EZ OMNIC) shortcut on the 

Windows desktop. 

 

Alternatively, you can click the Start button on the Windows 
taskbar, point to Programs (All Programs in Windows XP), point 
to the Thermo Nicolet folder, and then click OMNIC or 
EZ OMNIC. 

Depending on how the program has been configured, dialog 
boxes may appear asking for a user name and password. Type 
the requested information and then choose OK. 

The OMNIC window appears. This window is described in the 
next section and in the “Getting Started With OMNIC” tutorial 
available through Getting Started in the Help menu. 

Nicolet 380 User’s Guide 

19

Summary of Contents for Nicolet 380








































































































































Reviews:

No comments