1
Installation & User Guide
Kitchen Plinth Heater models
KPH 1800-LV and KPH 2100-LV
Low Voltage Models
Introduction
This heater is intended to install behind the plinth in the space under the kitchen cupboards. However,
it can be installed in similar kind of application.
This unit is made for two pipe pumped central heating systems. Flow and return and pipes should be
connected as per drawing mentioned in page 2.This unit should not be installed in one pipe system.
To allow enough airflow a minimum clearance 0f 20-25mm from the top of the unit to the any shelving.
This unit must be installed of flat surface to avoid vibration.
Isolating valves (not supplied) should be fitted to both pipes (flow & return) to allow easy servicing.
The flexible hose should be fitted to both pipe (flow & return) to allow easy servicing.
This unit operate with low voltage DC power supply hence suitable to be installed in bath room or high
humid areas.
The following items should be in the carton:
DC power supply.
Flexible connecting Hoses
Fitted Grille
Fixing screws (2)
In the event of any items missing or visibly damaged, please contact us on email.
