background image

8

LUNA 2T | INTRODUCTION

1.3 

General warnings

1.3.1 

Allowed use

• 

Please read this booklet carefully.

• 

The documentation supplied with the unit must be handed over to the owner who must keep it 

carefully for future maintenance or servicing.

• 

The company shall not be liable for any damage to persons, animals or property arising from 

installation, adjustment and maintenance mistakes, improper use or a partial or superficial 

reading of the information provided herein; moreover, in view of the constant improvement 

of the products, the company reserves the right to modify the specified data at any time and 

without notice and declines all responsibility for any inaccuracies in this booklet, if due to 

printing or transcription errors.

• 

The machines are designed for heating and/or cooling water. A different use, not expressly 

authorised by the manufacturer, is to be considered improper and therefore not allowed.

• 

The location, hydraulic, cooling and electrical systems must be determined by the system 

designer considering both the merely technical requirements and any local legislation in force 

and specific authorisations.

• 

All works must be carried out by qualified, experienced personnel aware of the relevant 

regulations in force in the various countries.

• 

Upon delivery of the goods by the carrier, check the integrity of both the packaging and the 

units. If there is any damage or missing components, indicate it on the delivery note and 

forward a formal complaint to the company by fax or registered mail within 8 days from the 

date of good reception.

• 

The warranty does not apply if:

• 

the personnel authorised by the company does not attend the machine start-up;

• 

the above indications are not respected.

1.3.2 

Remarks

• 

Pay particular attention to the use instructions preceded by the words "danger", "warning" 

or "important" because failure to respect them may lead to damage to the machine and/or 

people and property.

• 

The manufacturer declines all responsibility for any damage due to improper use of the 

machine, partial or superficial reading of the information provided herein.

• 

The machine must be installed in such a way that maintenance and/or repair operations are 

possible.

• 

The machine warranty does not cover the costs for ladders, scaffolding or other lifting systems 

that may be necessary to carry out works under warranty.

• 

The manufacturer does not provide drawings or specifications of connection systems.

• 

Any deviation from the prescriptions contained in this manual must be validated in writing by 

the manufacturer's technical support.

• 

For any faults not mentioned in this manual, please contact the Customer Service immediately.

Summary of Contents for LUNA 2T









































Reviews: