M 536991501911122018
THERMEX
PRO LINK II
69
EN
gLI
sH
»
P
R
O
L
INK
B
ASIC
INSTALLING THE TRANCIEVER ON WALL-MOUNTED LYON
The electronics on the wall-mounted Lyon are located on top of the hood. The transceiver is installed as follows:
Mount the cover on the plastic box contain-
ing the transceiver using 4 screws. Mount
the plastic plugs on the screws.
Place the filters in the hood and close the
cover.
Mount the box containing the transceiver in
a suitable fixed position inside the hood. Use
the double adhesive tape supplied for this.
NOTE: Be sure to wipe the surface thoroughly
with alcohol before mounting the transceiver
in its fixed position.
8
9
x4
x4
7
Remove the plastic cap from the connector on
the circuit board box. This easiest way to do this
is to use a screwdriver or similar tool to gently
coax the cap off.
Mount the connector from the transceiver on
the hood’s circuit board and replace the plastic
cap.
Remove the connector from the control panel of
the circuit board.
Mount the connector from the control panel on
the transceiver.
Mount the cover on the plastic box containing
the transceiver using 4 screws. Mount the plas-
tic plugs on the screws.
6
Mount the box containing the transceiver in a
suitable fixed position inside the hood. Use the
double adhesive tape supplied for this.
NOTE: Be sure to wipe the surface thoroughly
with alcohol before mounting the transceiver in
its fixed position.
1
3
4
2
x4
x4
5
