Operating Instructions
- Timer Mode
1.
Press Power button
2.
Press +
or -
button
s
to select
timer mode
"
1
0" =
10 minutes on, then turns off
.
"
2
0" =
20 minutes on, then turns off
.
"
3
0" =
30 minutes on, then turns off
.
"
P3
" =
30
minutes on,
and 30 min
utes
off,
continuously.
Unit must be powered off manually.
"
P6
" =
30
minutes on
and 60 min
utes
off,
continuously.
Unit
must
be
powered
off
m
anu
ally.
3.
Press
COOL
or
HEAT to select comfort mode.
4.
Press
"
+
" or "-"
button to select
comfort level. (See chart
below for conversion of comfort level
to temp
erature in
degrees Fahrenheit).
Press Power button
Press
COOL
or
HEAT
button
Press + or – to select desired
comfort mode
.
Unit will run
continuously
until
powered
off manually.
*
Please Note:
Always turn off
the ThermaZone Unit
when not applied to
a
patient
.
There is no need to disconnect
the
tubing or pad from machine. If you do
disconnect, check
the
water level when reapplying and add distilled water if needed.
WARNING:
This document is not a replacement for the
"Instruction
and Safety Manual for Your
Thermal Therapy Unit”(the “Manual”). Please read the Manual before using ThermaZone
products. Failure to follow the instruction in the Manual may result in injury. Keep the Manual in a
safe location for future reference.
Manual Operating Instructions
- Continuous
Mode
***
If no timer mode is selected , the ThermaZone Unit will run continuously.
