mesh cover
12 nylon feet
12 male poles
12 female
poles
COMPONENTS:
Start by examining all the parts:
INSERT SHOCK-CORDED POLES
Place the mesh cover on the ground, underside facing up.
Assemble the shock-corded poles and slide them into the sleeves.
Stand at the end of the mesh cover with both feet on the
shock-corded poles. Attach one end of a bow to a shock-corded
pole using the hook on the nylon foot.
Twist the other foot until the hook is facing the mesh.
Attach the foot, applying tension to the bow with your free hand.
BUILD A TWIST BOW:
ASSEMBLING THE BOW FRAME:
LIGHTWEIGHT SETUP:
4 twist bows
For the lightweight setup, assemble the cot
with four twist bows. Place
two in
the center slots and two in the
slots second from
the ends of
the fabric.
Instructions
M
ESH
C
OT
L
UXURY
L
ite
2 shock-corded poles
Place a male pole and a
female pole in one foot.
Repeat the same process with another
foot, so the two pieces are identical.
Connect the male and female poles to create a bow with two bars.
When assembled correctly the feet will face in opposite directions
STANDARD SETUP:
6 twist bows
For the standard setup, use all six twist bows.
Two slots will be left open, at the
positions second from
the ends.
thermarest.com
© 2012 Cascade Designs, Inc.
4000 1st Ave. South | Seattle, WA 98134 U.S.A.
1-206-505-9500 | art # 35-720
U.S. Patent 7,779,491
Tip:
You can place the twist bows in different slots to create a
setup with custom support.
For German, Spanish, Italian, Dutch, and Japanese instructions, please go to thermarest.com/cots
For video, please go to thermarest.com/cots/mesh
35720_LuxLite Mesh_inst.indd 1
6/7/12 10:41 AM
