background image

bling

1 CAUTION: 

1 The assembling of IR313GT
support. Without the authorization, users can not disassem
2 Please follow the rules and steps in this manual
afford any legal or economic
3 Without the authorized technician
fuse of the configuration 
4 Please do not put the IR
electric shock, damage or fire
5 Output voltage of IR313GT
other devices not specified.
before connection between the
6 Connect the IR313GT with power source without spe
IR313GT. 
7 Photos below are only for reference, please

2 IR313GT configurations

1 Standard configuration

NO. 

NOTE: Bracket and decoding box of Audi

2 Brackets for Audi A6L

NO. 

Name 

A6L Fasten kit 

M4X10 screw (fasten

M4X8 pan-head screw

M5X16 pan-head 

T type cutting kit 

Cable for IR313GT and decoding box

Guide to installing thermal night vision camera to vehicle or ATV 4x4

313GT should be authorized by the factory or local technical 

support. Without the authorization, users can not disassemble or repair.

rules and steps in this manual

or the manufacturer will

economic liability . 

3 Without the authorized technician’s support, please do not change the cables or

 location on the car. 

IR313GTin moist location or close to water, which will cause 

damage or fire by short circuit. 

313GT is 12v, it is only for IR output, please do not connect

specified. Please disconnect the IR313GT and the power source 

before connection between the IR313GT and the other specified devices.

with power source without specified cables will damage the 

7 Photos below are only for reference, please subject to products. 

configurations 

tandard configuration 

Name 

Quantity 

IR313GT 

Cable 

decoding box of Audi are needed 

6L 

Brackets for Audi A6L 

fasten the IR313GT) 

head screw (fasten the IR313GT) 

head tapping screw (fasten the IR313GT) 

for IR313GT and decoding box 

should be authorized by the factory or local technical 

ble or repair. 

the manufacturer will not 

ge the cables or 

, which will cause 

output, please do not connect 

T and the power source 

and the other specified devices. 

cified cables will damage the 

Quantity 





Summary of Contents for IR313GT









Reviews: