Thermal Arc pro-life 250s, Operating Manual

Page: 36 / 62

6.01 Stick Welding
x
Connect work lead to negative terminal
x
Connect electrode lead to positive terminal
x
Switch machine on
x
Connect remote control device if required
Use the Scroll Buttons to move to the parameter to be set. The LED will show which
function is being adjusted on the weld sequence graph. Use the control knob to adjust each
parameter.
x
Set HOT START
x
Set WELD current
x
Set Arc Control
Commence welding
6.02 DC LIFT TIG Welding
x
Connect work lead to positive terminal
x
Connect TIG torch to negative terminal
x
Switch machine on
x
Set weld current.
x
Connect remote control device. A remote control device is required for use during LIFT
TIG operation. See section 4.01, section 2 “ Remote Control Socket ”, for complete details
of the remote device.
Use the Scroll Buttons to move to the parameter to be set. The LED will show which
function is being adjusted on the weld sequence graph. Use the control knob to adjust each
parameter.
x
Set WELD current
Commence welding
PRO-LITE 250S
June 29, 2005 36