en-us
Operating the appliance
16
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
1.
Press
"
button to open the
Settings
menu.
2.
Use
(
button to move to the menu item
Appliance
settings
.
3.
Press
8
button.
4.
Press
)
button to move to the menu
item
Automatic clean lock
.
5.
To change the setting, press
:
button.
Automatic door opening
The automatic door opening function supports you in
opening the door.
As soon as you activate this function, automatic door
opening moves out and supports you in opening the
door.
9
CAUTION
Repeatedly closing the door too early will cause
automatic door opening to fail or wear out.
Do not close the door as long as automatic
door opening is still moved out.
If you have however closed the door, leave it
closed for 5 minutes. Automatic door opening
will re-adjust itself.
Open menu item Auto door opening of refrigerator
compartment:
1.
Press
"
button to open the
Settings
menu.
2.
Press
(
button to move to the
Appliance settings
menu.
3.
Press
8
button to open the menu.
4.
Press
)
button to move the menu item
Auto door
opening
j
.
5.
To change the setting, press
:
button.
Open menu item Auto door opening of freezer
compartment:
1.
Press
"
button to open the
Settings
menu.
2.
Press
(
button to move to the
Appliance settings
menu.
3.
Press
8
button to open the menu.
4.
Press
)
button to move the menu item
Auto door
opening
k
.
5.
To change the setting, press
:
button.
Switching on Push-to-open system
In an installation situation without handles you can
select the Push-to-open system. Your appliance will
then open a crack if you press lightly on the door.
Note:
Please note that automatic door opening is
disabled if Sabbath mode is activated.
1.
Open menu item
Auto door opening
of
refrigerator compartment or freezer compartment.
2.
Select menu item
Push-to-open system
.
3.
Press
8
button to open the menu item.
4.
Select
Opening force
.Here you can select the
level of force required to activate automatic door
opening.
5.
Select
Opening duration
.Here you can select
how long the door should remain open a crack
before it closes again automatically.
Note:
If the door only remains open a crack, the
appliance checks once a second whether the door
is still ajar.After the selected opening duration
elapses, the appliance will close the door
automatically.
Switching on Pull-to-open system
In an installation situation with handles you can
select the Pull-to-open system. Your appliance will
support you in opening the door as soon as you pull
on the handle.
1.
Open menu item
Auto door opening
of
refrigerator compartment or freezer compartment.
2.
Select menu item
Pull-to-open system
.
3.
Press
8
button to open the menu item.
4.
Select menu item
Opening force
. Here you can
select the level of force required to activate
automatic door opening.
Switching off automatic door opening
1.
Open menu item
Auto door opening
.
2.
Select menu item
Off
.
Switching the water filter counter on and
off
If you have replaced the water filter with a particle
filter, switch the water filter counter off. It is not
needed in this case as the particle filter does not
have to be replaced.
1.
Press
"
button to open the
Settings
menu.
2.
Use
(
button to move to the
Appliance settings
menu.
3.
Press
8
button.
4.
Press
)
button to move to the menu item
Water
filter counter
.
5.
To change the setting, press
:
button.
