Service Manual for the Thermador Pro Harmony Range, Model PRL364GDH/01
58300000154022_ARA_EN_D
Page 5 of 68
1.4 Recommended Tools and Supplies
The following tools and supplies are recommended to use when
servicing this appliance:
Caution
Power Drivers
■ If using a power driver, set the clutch to the lowest setting
Driver sizes: T-10, T-20, T-25, T-30
1/4 inch nut driver or 1/4 inch socket wrench / ratchet
Wrench sizes: 1/2 inch, 1/4 inch, 5/16 inch, 11/32 inch open-end
Socket wrench / ratchet 11/32 inch
Swivel head driver with an 11/32 inch, deep-well socket
Large nut driver (1 inch min.) with a deep-well socket
Long, hand-held T-20 driver
Adjustable wrench
Pipe wrench
Precision screwdriver with a high-strength blade, 1/8-inch
(3.0 mm) wide, .020-inch (0.50 mm) thickness tip
Flat blade screwdrivers: large, small
Slip joint pliers
Needle-Nose pliers
Hook or non-straight hex key (Allen wrench)
Protective gloves
Gas leak test equipment
Pipe sealant
Small mirror
Protective eye wear (such as glasses or goggles)
Flashlight
Amp meter
Thermometer with thermocouple leads
Multimeter
Air lifter / air dolly
1.5 Important Safety Information
Before starting to service an appliance, familiarize yourself with all
safety information and precautions contained in this manual.
1.5.1
Safety Symbols Used In This Manual
This symbol alerts you to dangers that may result in bodily injury or
death.
Caution
This symbol alerts you to actions that may result in damage to the
product, or property.
1.5.2
Safety Precautions to Know Prior to Servicing
Before You Start Servicing the Appliance
Before disassembly, removal or installation of any component, do the
following:
■ Turn off electrical power by removing the power cord from the
electrical outlet, and putting the circuit breaker in the
OFF
position
or by removing the fuse.
■ Turn off the gas supply to the appliance.
■ Make sure grates and burner assemblies are cool before
removing them.