26
Home Connect
This appliance is Wi-Fi enabled and settings can be sent
to the appliance via a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as a cooktop
with no network connection. The cooktop can always be
operated via the control panel.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
▯
Cooktops are not designed to be used unattended –
you must always keep an eye on the cooking process.
▯
Ensure that you follow the safety instructions in this
instruction manual and that these are also observed
when operating the appliance via the Home Connect
app. Follow the instructions in the Home Connect app.
▯
Using the Home Connect app, you can send settings
to your appliance, and you must then confirm these on
the appliance. It is not possible to operate the
appliance while you are away from home.
▯
If the appliance is being operated by the controls on
the appliance itself, this mode of operation always has
priority. It is not possible to operate the appliance
using the Home Connect app during this time.
Setting Up
To implement settings via Home Connect, you must have
installed and set up the Home Connect app on your
mobile device.
Refer to the supplied Home Connect documents for
more information.
Follow the steps specified by the app to implement the
settings.
The app must be open in order to perform the setup
process.
Automatic Registration in the Home Network
You require a routher that has WPS functionality. If you
do not have this, follow the steps under “Manually
logging into your home network”.
1.
Turn on the cooktop.
2.
Touch and hold the KITCHEN TIMER key for
4 seconds.
The product information is displayed.
3.
Touch the KITCHEN TIMER key repeatedly until
•’
and
‚
are displayed alternately.
‹
lights up in the cooking zone display.
4.
Set the
‚
value on the control panel.
‚
and the
D
symbol will flash on the cooking zone
display.
5.
Press the WPS button on the router within the next
2 minutes.
The cooktop is connected to the home network if the
D
symbol no longer flashes but is lit up on the
cooking position display.
Note:
If a connection cannot be established, the
"Connect manually"
ƒ
value appears. Register the
appliance in the home network manually or try
connecting automatically again.
The appliance automatically tries to connect to the
app, and
•’
and
ƒ
are displayed alternately.The
‚
value flashes on the control panel.
6.
Start the app on the mobile device and follow the
instructions for automatic network registration.
The registration procedure has been completed once
the
‹
value appears on the cooking position display.
Manual Registration in the Home Network
1.
Turn on the cooktop.
2.
Touch and hold the KITCHEN TIMER key for
4 seconds.
The product information is displayed.
.,7&+(1
7,0(5
&22.
7,0(5
6723
:$7&+
/2&.
+22'
6<1&
/,*+7
(
.,7&+(1
7,0(5
&22.
7,0(5
6723
:$7&+
/2&.
+22'
6<1&
/,*+7