![THERMACUT EX-TRAFIRE 55SD Operator'S Manual Download Page 38](http://html1.mh-extra.com/html/thermacut/ex-trafire-55sd/ex-trafire-55sd_operators-manual_1102062038.webp)
EX-TRAFIRE
®
55SD
Operator Manual, Revision T-3
4-38
Operating the machine torch
WARNING
Plasma arc is generated immediately
when the torch trigger is depressed
Plasma arc is generated immediately when the torch trigger is depressed�
The plasma arc will cut quickly through gloves and skin� Make sure the power supply is switched off
before changing consumables�
•
Keep away from the torch tip�
•
Do not hold the piece that is to be cut and keep your hands away from the cutting path�
•
Never point the torch toward yourself or toward others�
•
Never use with the pendant control switch�
Alignment of the machine torch
Mount the machine torch perpendicular to the material to be cut, use a square to align the torch
at 0 ° and 90 °, if torch alignment is not possible, check the cutting table for level to obtain a true
vertical cut�