THERMACUT EX-TRAFIRE 40SD, Operator'S Manual

Page: 32 / 72

EX-TRAFIRE
®
40SD
Operator Manual, Revision T-15 4-32
OPERATION
Front view
Front control panel
Front control panel
Work clamp connector Torch connector
1� Power ON/OFF indicator� LED1 illuminates when
the power supply is turned ON�
2� Cutting current regulator knob
3� Over-Current (OC), Over-Temperature (OT) alarm
indicator
4� Multifunctional indicator
TIP – LED blinks when the consumables are loose,
improperly installed, or missing (this indication
can be accompanied with the gas pulsing sound)
TORCH – LED blinks when the retaining cap is
loose, improperly installed, or missing
GAS – LED illuminates when the gas pressure is
lower than 3 bar�
5� DC WORK – pilot and main plasma arc ON
indicator
6� RUN/TEST – mode switch
1 2 3 4 5 6
V