THERMACUT EX-TRAFIRE 40SD, Operator'S Manual

Page: 17 / 72

EX-TRAFIRE
®
40SD
Operator Manual, Revision T-15 3-17
INSTALLATION
Upon receipt of goods
1� Verify that all ordered items have been received, for short shipment or damage to equipment,
contact the Authorized Supplier�
2� If there is evidence of damage, see Claims, below�
3� All communication relating to this plasma arc system should include the model and serial
number located on the bottom of the plasma arc power supply�
4� Read the information in the SAFETY section of this manual before installing and operating the
system�
Claims
Claims for shipping damage; If the unit has been damaged in transit, contact the carrier
immediately, take photographs of the packaging and areas of damage on the system� Inform
Authorized Supplier, who will provide copies of relevant documentation� For further assistance,
contact Customer Services, details are listed at the back of this manual�
Claims for defective or missing goods;
All systems shipped from Authorized Supplier have been
subjected to a rigorous quality control procedure� If any of the parts are found to be defective or
missing, contact Authorized Supplier with the relevant information� For further assistance contact
Customer Services, details are listed at the back of this manual�
Box contents
Check the items that are shown in the illustration below� Packaging also includes an air line
connection DN7�2ES plug with male thread G1/4”�
CONSUMABLE
STARTER KIT
OPERATOR
MANUAL
or