THERMACUT EX-TRAFIRE 30H, Operator'S Manual

Page: 19 / 56

EX-TRAFIRE
®
30H
Operator Manual, Revision T-15 3-19
Gas supply installation
Connect the air-line hose as follows:
1� Air-line hose connection�
•
Female G1/4” thread adapter�
2� Air-line hose�
•
Use an inert gas hose with a minimum
internal diameter of 6 mm, make
a direct attachment or use a quick
disconnect fitting�
Hand torch
Cutting guide
Hand shield
The circle cutting guide installation - for the FHT-EX
®
30/40H
1� Turn off the plasma power supply�
2� Insert the hand torch into the cutting guide�
Retaining cap