background image

©2018 Thermaco, Inc. All rights reserved  •  Patented/Patents Pending  •  Specifications subject to change without notice

Thermaco, Inc. • 646 Greensboro St. • Asheboro, N. C. 27204-2548 • (336) 629-4651

MNL-TZ-1826  23

A THERMACO® Technology

Trapzilla

®

 Grease Interceptor

Installation and Operations Manual

TZ-1826 Models

AEF

MNL-TZ-1826  22

7. Limited Warranty and Remedy

Thermaco, Inc. warrants to the original user that the equipment manufactured by Thermaco and delivered 

with this warranty (the “Product”) shall be free from material defects in workmanship and materials during 

the lifetime of the plumbing system in which the Product is initially installed.
Any claim under this warranty must be made in writing to Thermaco at 646 Greensboro Street, Asheboro, 

NC  27203 promptly after discovery of the defect and the Product must be delivered, prepaid, to 

Thermaco, together with proof of purchase and a return authorization number issued by Thermaco. If 

Thermaco determines that the Product is defective, Thermaco’s sole obligation, and the purchaser’s 

sole and exclusive remedy, is the repair or replacement, at Thermaco’s option, of the defective Product.   
This warranty shall not cover any defect or damage resulting directly or indirectly from: (i) failure to 

properly install, operate or maintain the Product in accordance with Thermaco’s instructions, including, 

without limitation, use in excess of rated flow, installation deeper than manufacturer’s recommendation 

or in conjunction with unapproved components, use to remove emulsified fats and oils or use that fails 

to comply with applicable laws, regulations or codes; (ii) damage in transit, handling or installation; (iii) 

modifications, adjustments, or alterations of the Product; (iv) disassembly of components other than as 

required for prescribed maintenance; or (v) any other causes not arising out of defects in workmanship 

or materials. Thermaco shall not be responsible for damage to Products resulting from ultraviolet light 

exposure, vault flooding, sewer line back-up, pumping or lift station failure, ambient water flow, freezing, or 

other sources of water damage.  Costs for any service, adjustment, removal, repair, packing, or otherwise 

incurred with respect to the Product prior to submission for warranty are the responsibility of purchaser.
No distributor, sales representative or other person is authorized to make any warranty statements 

on behalf of Thermaco regarding Products other than as provided herein.  This statement of warranty 

supersedes any quote, brochure, or other statement or document with respect to warranty of Thermaco 

products.   
EXCEPT AS  EXPRESSLY  SET  FORTH ABOVE,THERMACO  MAKES  NO  REPRESENTATIONS, 

WARRANTIES OR GUARANTEES, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT 

LIMITATION, AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHETHER 

OR NOT THERMACO HAD KNOWLEDGE OF PURCHASER’S PARTICULAR REQUIREMENTS OR 

NEEDS, OR WITH RESPECT TO ODOR GENERATION OR OTHER INCIDENTALS RELATING TO 

USE OF THE PRODUCT.
The sole and exclusive remedy with respect to this warranty or any other claim relating to defects or any 

other condition or use of Products, however caused, and whether such claim is based upon warranty, 

contract, tort, strict liability or any other theory, is LIMITED to the repair or replacement of the Product, 

excluding any cost to remove or install the Product or, at Thermaco’s option, repayment of the purchase 

price.  IN NO EVENT SHALL THERMACO BE LIABLE, WHETHER IN CONTRACT, WARRANTY, TORT 

(INCLUDING NEGLIGENCE), STRICT LIABILITY, INDEMNITY OR ANY OTHER LEGAL THEORY, 

FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.  UNDER NO CIRCUMSTANCES WILL THE 

AGGREGATE LIABILITY OF THERMACO FOR ANY CAUSE OF ACTION RELATED TO THE PRODUCT 

COVERED HEREBY EXCEED THE NET PURCHASE PRICE RECEIVED BY THERMACO FOR THE 

PRODUCT.   

Note: Do not Pressure/Hydrostatic test our units.

Summary of Contents for Trapzilla TZ-1826













Reviews: