Ultra Propane - Ultra 250
January 15, 2019
22
L.P GAS PROPANE GAS (VAPOROUS DRAW):
Your propane fired, high pressure, steam cleaner provides you with a clean burning,
odorless, USDA allowable system. Ideal for indoor use. We recommend you own two
propane cylinders to provide you with many hours of cleaning time. Each cylinder will
supply you with approximately 3-4 hours of total cleaning time. However, due to the
nature of propane gas under pressure, you will only be able to utilize each cylinder of gas
continuously approximately 1 ½ hours before switching over to your second cylinder.
This will allow the first tank to “defrost” during the period of time you are using your
second cylinder. REMEMBER: each cylinder shall last approximately 3-4 hours to total
cleaning time and approximately 1 ½ hours of continuous cleaning time before
necessitating a change over to a second cylinder. Do not run the machine in small
confined areas. Check you local regulations for propane use in your area.
STORAGE:
It is very important that you store your cylinder filled with LP gas in an upright position
and in a cool location. DO NOT leave your filled cylinder in a hot confined and
unventilated environment. When you are not using your cylinder, it is recommended
that you store it outside.
MOUNTING CYLINDER ON YOUR THERMA-KLEEN® MODEL
We suggest that you mount your cylinder on your THERMA-KLEEN® steam cleaner so that
the regulator and LP gas hose are situated on the furthest side of the cylinder, away from
the machine.
a) Make sure all connections are tight. If you detect a strong propane smell, check all
connections.
b)
DO NOT
light the unit until this is corrected.
F
UEL PRESSURE SETTINGS:
Ultra 250: Fan nozzle:3-4 lb.= 240˚F temperature Blast nozzle:5-6 lb. 290-300˚F
temperature.
Water temperatures coming into your hose vary from season to season, cold water will
increase fuel pressure settings.
*Note: Stainless Steel Coils require slightly more fuel.
