Themis RES-XR4-3U, Installation Manual

Page: 40 / 184

RES-XR4-3U Installation Manual Version 1.3
1-10
Themis Computer
Table 1-5. I/O Connectors
Connector Description
PS/2
a
Mouse
b
 6-pin mini-DIN (female) connector to attach a PS/2 mouse device.
PS/2
a
Keyboard
b
 6-pin mini-DIN (female) connector to attach a PS/2 keyboard device.
USB Ports
Hi-Speed USB 2.0
 Two or four (motherboard dependent) 4-pin USB connectors to attach
serial devices to USB Ports 0 and 1, or 0 through 3, depending on the
motherboard.
COM 1 Serial Port
 One DB9 (male) connector on rear panel to attach a serial device to
COM 1 port
Note: A second serial port (COM 2) can be accessed directly from the
motherboard.
VGA Port  15-pin VGA connector to attach a monitor device.
Ethernet LAN Ports
 Standard RJ45 connector to attach one or two gigabit Ethernet LAN
line(s)—LAN 1 and LAN 2.
 Standard RJ45 connector to attach one or two 10 gigabit Ethernet
LAN line(s)—LAN 1 and LAN 2 (X9DRH -iTF/-7TF only).
IPMI Dedicated LAN Port  Standard RJ45 connector to attach a dedicated IPMI LAN line.
a—X9DRH motherboards do not have PS/2 connectors
b—Only one PS/2 connector on X9DR3 motherboard.