Themis RES - 32XR3, Installation Manual

Page: 80 / 142

RES-21XR3 for X8SAX Installation Manual
3-14
Themis Computer
3.3.3.19 Legacy USB Support
Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB
support will be automatically enabled if a legacy USB device is installed on the
motherboard, and vice versa. The settings are Disabled, Enabled, and
Auto (default).
3.3.4 IDE / Floppy Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of
the IDE devices and displays the following items:
3.3.4.1 Floppy A
This feature allows the user to select the type of floppy drive connected to the sys-
tem. The options are Disabled, 360KB 5 1/4”, 1.2MB 5 1/4”, 720KB 3 1/2”,
1.44MB 3 1/2” and 2.88MB 3 1/2”.
3.3.4.2 SATA#1 Configuration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while
selecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,
Compatible,
Enhanced (default).
Configure SATA#1 as
This feature allows the user to select the drive type for SATA#1. The options are
IDE (default), RAID and AHCI.
ICH RAID Code Base (Available if RAID is selected)
Select Intel to enable Intel's SATA Host RAID utility. Select Adaptec to enable
Adaptec's Host RAID utility. The options are
Intel (default) and Adaptec.
3.3.4.3 SATA#2 Configuration
Selecting Enhanced will set SATA#2 to native SATA mode. The options are Dis-
abled and
Enhanced (default).
3.3.4.4 IDE Detect Timeout (seconds)
Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI
devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and
35 .