3-27
Themis Computer
BIOS Setup Utility
Advanced Setup Configurations
• SEL Entry Number
• SEL Record ID
• SEL Record Type
• Event Timestamp
• Generator ID
• Event Message Format User
• Event Sensor Type
• Event Sensor Number
• Event Dir Type
• Event Data
3.3.12.1 Clear BMC System Event Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel to
keep the BMC System log. The options are
OK
and Cancel.
3.3.13
Set LAN Configuration
Set this feature to configure the IPMI LAN adapter with a network address as shown
in the following graphics.
3.3.13.1 Channel Number
Enter the channel number for the SET LAN Config command. This is initially set to
[01]
. Press “+” or “-” on your keyboard to change the Channel Number.
3.3.13.2 Channel Number Status
This feature returns the channel status for the Channel Number selected above:
Channel Number is “OK” or “Wrong Channel Number”.
Caution:
Any cleared information is unrecoverable. Make absolutely sure that you
no longer need any data stored in the log before clearing the BMC Event Log.
