RES-32XR3-S for X8DTL-6/6F Installation Manual
1-4
Themis Computer
The RES-32XR3 front panel houses eight removable storage drive bays (see
Figure
1-3
). Eight SAS and six SATA drives are supported by the X8DTL-6 and X8DTL-6F
motherboards. Drive requirements should be specified at the time the system is pur-
chased.
Also included on the front panel is a reset switch and the system power button and
LEDs (see
Figure 1-5
on page 1-7). The rear panel contains I/O faceplates for seven
PCI cards (graphics, RAID, NIC, etc.), two AC power supplies with latch locks and
power-cord sockets, and all I/O connectors (see
Figure 1-5
on page 1-7).
Major internal components of the RES-32XR3-S for X8DTL-6/6F can be seen in
Figure 1-3.
External Features of RES-32XR3-S (Front and Rear)
Front View (Doors Open)
Dual Power Supplies
System Power
ON/OFF Switch
CD-RW/DVD-ROM
Combo Drive
Rear I/O Panel (see
Figure 1-5
, page 1-7
17” (42.7 cm), 19” with Rack Mounts
17” (43.2 cm) deep
Rear View
PCI-Express 2.0 x8 (in x16 slot)
PCI-Express 2.0 x4 (in x8 slot)
PCI 33MHz
PCI-Express 2.0 x4 (in x8 slot)
Slot 1
Front LED Indicator Panel
(see
Figure 1-5 on page 1-7
or 2.88-MB DAT Drive (
Optional
)
1 3.5” Floppy-Disk Drive (
Optional
)
Storage Drives (total of 8 SAS/SATA)
5.25”
(3RU)
PCI 33MHz
PCI-Express 1.0 x4 (in x8 slot)
(Remove Blank Cover Plate)
AC Power Socket
(3-prong NEMA 15)
Power Supply
Latch Lock
Slot 7
PS1
PS2
(unused)