manualshive.com logo in svg

Themis RES-32XR3-S, Installation Manual

Share
Download
Themis RES-32XR3-S Installation Manual Download Page 25

Preface

xxi

Themis Computer

tered DIMM memory modules. The RES-32XR3-S  for X8DTL-6/6F is based on the
functionality and capability of the following Intel chipset:

• Intel 5500 (Tylersburg) chipset 

•  IOH-24D

An overview of RES-32XR3-S  for X8DTL-6/6F design and specifications is given
in Chapter 1, "Overview and Specifications", of this manual. 

This manual is intended for an experienced system administrator with a knowledge
of both networking and high-speed server systems.

Website Information

Themis Computer corporate and product information may be accessed on the World
Wide Web by browsing the website 

http://www.themis.com

.

Your Comments are Welcome

We are interested in improving our documentation and welcome your comments and
suggestions. You can email your comments to us at 

[email protected]

.

Please include the document part number in the subject line of your email.

Notes, Cautions, Warnings, and Sidebars

The following icons and formatted text are included in this document for the reasons
described:

 

Note:

A note provides additional information concerning the procedure or action

being described.

Summary of Contents for RES-32XR3-S



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands