Themis RES-22XR3, Installation Manual

Page: 125 / 162

C—Red Hat Enterprise Linux 5 Installation
Installation
C-7
Themis Computer
Click Next to continue.
Step 8:
Create default layout allows you to have some control concerning what data is
removed (if any) from your system. Your options are:
•
Remove all partitions on selected drives and create default layout — select this option
to remove all partitions on your storage drive(s) (this includes partitions created by other
operating systems such as Windows VFAT or NTFS partitions).
•
Remove Linux partitions on selected drives and create default layout — select this
option to remove only Linux partitions (partitions created from a previous Linux installation).
This does not remove other partitions you may have on your storage drive(s) (such as VFAT
or FAT32 partitions).
•
Use free space on selected drives and create default layout — select this option to
retain your current data and partitions, assuming you have enough free space available on
your storage drive(s).
Using your mouse, choose the storage drive(s) on which you want Red Hat Enterprise Linux
to be installed. If you have two or more drives, you can choose which drive(s) should contain
this installation. Unselected drives, and any data on them, are not touched.
To review and make any necessary changes to the partitions created by automatic partition-
Figure C-7. Partitioning