2-5
Themis Computer
2—Installation and Operation
Installation Procedures
The following procedure explains how to install the DDR3 FBD Memory Modules...
1.
If a module is already seated in the slot you have selected for installation,
remove it by gently pressing down and outward on the latches at both ends of
the slot (see
on page 2-6), then pulling the old module directly up
from the slot until it is free of the connector (see
Figure 2-3.
Memory Module Slot Locations (X8DTU-F Motherboard)
P2 DIMM 1B
P2 DIMM 1A
P2 DIMM 2B
P2 DIMM 2A
P2 DIMM 3B
P2 DIMM 3A
P1 DIMM 3A
P1 DIMM 3B
P1 DIMM 2A
P1 DIMM 2B
P1 DIMM 1A
P1 DIMM 1B
Branch 0
Branch 1
Branch 2
Branch 1
Branch 2
Branch 0
Summary of Contents for RES-12XR3
