Themis CoolShell CS-3U, Installation Manual

Page: 39 / 118

2-7
Themis Computer
Installation and Operation
Operation
2.2 Operation
2.2.1 Operation with Factory-Installed Linux
1. After the system boots (from Linux), login by entering the system ID [
root
]
followed by the password [
root12
].
2. From the screen that results after the system boots, perform the following
steps to activate all monitors, applications, system tools, and NVIDIA tools:
• Select
System Tools
under the
Applications
menu
• Select
NVIDIA X Server Settings
, then
X Server Display Con-
figuration
• Select
Monitor
to activate
• Select
Configure
button
• Select
Single Monitor
• Select
Separate X Screen
, then press
OK
• Repeat for all monitors
• Press the
Save
button
• Save the
xconfig
file
• Press Quit
3. Log out of the system, then log back into the system, after which all monitors
should be active.